CNC Milling Machine Project – Learn CNC Router Tutorial Videos Released

Ivan Irons at www.cncinformation.com has just completed the second phase of a new video tutorial series on a CNC Stomp Pad Project that is shot in sequential steps. This final phase highlights the machining and finishing steps of his project. It is a step-by-step personal account of a CNC project from the design phase to the end product. It contains useful design and machining tips for all CNC enthusiasts.

December 18, 2007 (FPRC) --
The video tutorial series was made to take beginner to intermediate CNC hobbyists through the major steps in the CNC process. Ivan narrates each video with technical, yet easy to understand descriptions of the process along with useful personal tips from his CNC experience.

Ivan’s video series starts out with the design phase, which includes all of the computer design, CAD, and CAM work. These first four video’s were released earlier in the month and now the conclusion of the project has been released with video’s 5-10 which highlight the CNC plasma cutting, grinding, and end product. If you missed the first four video’s they can be viewed at: http://www.cncinformation.com/CNCBlog/

Here is a summary of video’s 5-10:

Video 5: In this video Ivan goes through Mach 3 to look over the g-code. He checks to see if we have any problems before we go to the CNC Plasma Cutter.

Video 6: Ivan heads out to the shop and do some work. He shows how he zeros out the cnc plasma cutter and starts cutting the aluminum stomp pad. Once he is done, the stomp pad gets looked over and he notes the slag or dross we will have to grind off next.

Video 7: In this video Ivan rough grinds the cnc stomp pad to remove the dross. It’s a rough grind because later we will use a DA Sander to smooth it all out.

Video 8: During this CNC Video Segment Ivan sands our CNC Stomp Pad with a Dual Action (DA) sander. The CNC Plasma Cutter part then is taken over to a stand. Then Ivan starts to look at different traction spikes and how they will look.

Video 9: In this video the holes are drilled in the CNC Stomp Pad. The holes are drilled and then Ivan cleansthem out.We bend the stomp pad while drilling and we must hammer it flat next.

Video 10:Here is the final video in the CNC Stomp Pad Tutorial Video Series. In this video, Ivan goes over the final assembly of the stomp pad. Then we watch as we used double sided tape to adhere it to the snowboard. Finally we take a look at some final photos of the CNC Plasma Cutter Stomp Pad on the Snowboard.

Ivan has created a unique and personalized CNC Plasma Cutter video tutorial series that that leaves the viewer anticipating the next video in the series. The complete video series from start to finish can be viewed at: http://www.cncinformation.com/CNCBlog/cnc-stomp-pad-video-tutorials-learn-cnc-plasma-cutting/. You can always check on Ivan’s website at http://www.cncinformation.com to find his latest CNC Plasma Cutter projects and Hobby CNC Information.

About CNC Information: CNC Information is an information website that offers users a deeper insight into CNC.

For more information contact Ivan Irons of Learn CNC (http://www.cncinformation.com)
425-503-8401

Keywords: CNC Plasma Cutter, Hobby CNC, GCode

You can read this press release online at: http://www.free-press-release-center.info/pr00000000000000009567.html